IOs Configuration
Double-click the unit that you wish to configure.
Navigate to the IOs tab.Enter the Manager application >> My units >> Locate the unit and click on it >> Click on the “Configuration” tab >> IO’s
Create two IOs (Analog input for the fuel measurement and Digital input for the fuel sensor connection status):
Analog input:Inputa.
Select site_global.fuel_X
Check the main fuel tank
Give it a meaningful name
Select the relevant calibration table
e.Check the “Panorama Display”
Apply to save the data
...
Digital input
...
...
Choose site_global.fuel_1_disconnected
...
...
Give it a meaningful name
...
...
Display text: “connected-disconnected”
...
Check the “Panorama Display”
Apply to save.
...
...
Display Configuration
...
Select the relevant unit on the organization tree.
Navigate to live display.
Select the config button.
Under “Section: Generator”, check Enter the Manager application >> My units >> Locate the unit and click on it >> Click on the “Configuration” tab >> “Device Configuration” >> Section “Fuel” >> Check the “Fuel 1” and/or “Fuel 2”
...
Navigate to the
...
6. Check the “Layout Display” button.
...
Panorama application >> “Live” mode >> Locate the unit and click on it >> Locate the “Generator” card >> “Fuel Level” section >> Validate the fuel level indication
...
Record the fuel level value and input it in the calibration calculator section.
If we get a match, continue to the next document
Else, If we don’t, redo the calibration process.
...
9 4. Save the table with the name of the site.