Compulab gateway is an industrial computer that can be easily customized to meet your needs. Using the Compulab gateway loaded with Galooli firmware, you can remotely manage, monitor, and control stationary assets, such as telecom sites, microgrids, rechargeable batteries, and generators.
A Compulab device connects to all sensors, accessories, and devices, gathering data and sending it to the Galooli platform/servers.
Model | Galooli PN. |
|---|---|
IOTG-IMX8PLUS-C1800QM-D4-N32-WB-JEC25x-FARS4-FBRS2-FDIO-POE-PS-XL-TIC | TBA100-RTUCOM-020 |
| Table of Contents |
|---|
Features
Manufacturer site: Compulab
NXP i.MX8M-Plus CPU, quad-core Cortex-A53
Up to 8GB 4GB RAM and 128GB 32GB eMMC
LTE/4G modem, WiFi 802.11ax, Bluetooth 5.3
2x LAN, USB3.0, 2x USB2.0 and 2x 1x CAN bus
Up-to 3x RS485 | 1x RS485, 1x RS232 and digital I/O
Modbus RTU, Modbus TCP and MQTT
Secure boot, TPM and Hardware Watchdog
Custom I/O expansions boards
Hardware Specifications
CPU Core | |
CPU | |
NXP i.MX8M Plus Quad, quad-core ARM Cortex-A53, 1.8GHz | |
NPU | AI/ML Neural Processing Unit, up to 2.3 TOPS |
Real-Time |
Co-processor | ARM Cortex-M7, 800Mhz |
Memory and Storage | |
RAM | |
4GB, LPDDR4 |
Storage |
(soldered on-board) | 32GB eMMC flash |
Display and Graphics | |
Display Output | DVI-D, up to 1080p60 |
GPU and Video | GC7000UL GPU |
Network | |
LAN | 2x 1000Mbps Ethernet ports, RJ45 connectors |
| 802.11ax |
Wi-Fi and Bluetooth 5.3 BLE |
Wi-Fi 6E AX210 module | |
| 4G/LTE CAT4 cellular module, Quectel EC25-E (EU bands) |
as default. Upon requirement, Quectel EC25-A (US bands) can be used as an alternative. | |
SIM card socket | |
Cellular rubber duck antenna | |
GNSS | GPS |
I/O | |
| 2x USB2.0 ports, type-A connectors (back panel) |
1x USB3.0 port, type-A connector (front panel) | |
RS485 / RS232 | |
1 RS485 Port (half-duplex) |
, 1 RS232 port as default. Upon requirement, the device can contain a different set of ports, up-to 3x RS485 (half-duplex) | RS232 ports are available. | |
| 1x CAN bus port as default as default. |
Upon requirement, an additional 1x CAN bus port |
Isolated, terminal-block connector
is available. | |
| 4x digital outputs + 4x digital inputs |
| 1x serial console via UART-to-USB bridge, micro-USB connector |
Support for NXP SDP/UUU protocol, micro-USB connector | |
Expansion Connector | Expansion connector for add-on boards |
System | |
RTC | Real time clock operated from on-board coin-cell battery |
Watchdog | Hardware watchdog |
| Secure boot, implemented with i.MX8M Plus HAB module |
Upon requirement, TPM 2.0, Infineon SLB9670 | |
(implemented with add-on board installed in expansion connector) is available. | |
LEDs | 2x general purpose LEDs |
PoE | Support for PoE (powered device) |
Electrical Specifications | ||
Power Supply | DC input: unregulated 8V to 36V | |
Power Consumption | 2.5W - 8W, depending on system load and configuration | |
Mechanical Specifications | ||
Dimensions | 132 x 84 x 25 mm | |
Enclosure Material | Aluminum housing | |
Cooling | Passive cooling, fan-less design | |
Weight | 550 gram | |
Compliance | ||
Regulatory | FCC, CE, UKCA | |
EMC | EN 55032/5, EN 61000-6-2, EN 61000-6-3 | |
Safety | EN/UL/IEC 62368-1 | |
Reliability and Environmental | ||
MTTF | > 200,000 hours | |
Warranty | 5 years | |
Operation Temperature | ||
Industrial: -40° to 80° C | ||
Storage Temperature | -40° to 85° C | |
Relative Humidity | 10% to 90% (operation) | |
Pinout
Wiring Diagram
Status LEDs
