Versions Compared

Old Version 13

changes.mady.by.user arkadi kaplon

Saved on

compared with

New Version Current

changes.mady.by.user arkadi kaplon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

 

Request Status Commands

Set Parameters Commands

Types of Commands

A request status command is used to request a report message containing specific parameter information without changing the parameter's value.

A set parameters commands used to set a specific parameter.

 

 

 

Command Identifiers

The Request Status Commands ends with a “?”

image-20240821-132517.png

The Set Parameters Commands ends with an “!”

image-20240821-132423.png

 

 

 

Commands List & Descriptions

Note

  • Since the commands are case sensitive, they must all be written in lower case.

  • Ensure that the requests are written exactly as described in this article.

  • location: ?

    • Requests the current location of the K2

image-20240821-135653.pngImage Added

  • apn: ?

    • Requests the APN/User/Password of the K2

image-20240821-135835.pngImage Added

  • host: ?

    • Requests the host URL (Server URL) of the K2

image-20240821-140100.pngImage Added

  • host: name of the host!

    • Sets the host URL (Server URL) of the K2.

  • apn: internet!

    • Sets the APN to “Internet”, and clears the User/Password parameters

  • apn: name of the APN,User,Password!

    • Sets the APN and/or User and/or Password of the K2

  • unit reset!

    • Turns the K2 off and on

image-20240821-140425.pngImage Added

  • mobilize!

    • Enables the immobilizer for 30 seconds

  • immobilizer!

    • Disables the immobilizer

...