Compulab gateway is an industrial computer that can be easily customized to meet your needs. Using the Compulab gateway, you can remotely manage, monitor, and control stationary assets, such as telecom sites, microgrids, rechargeable batteries, and generators.
A Compulab device connects to all sensors, accessories, and devices, gathering data and sending it to the Galooli platform/servers.
Model | Galooli PN. |
|---|---|
IOTG-IMX8PLUS-C1800QM-D4-N32-WB-JEC25x-FARS4-FBRS2-FDIO-POE-PS-XL-TIC | TBA |
| Table of Contents |
|---|
Features
Manufacturer site: Compulab
NXP i.MX8M-Plus CPU, quad-core Cortex-A53
Up to 8GB RAM and 128GB eMMC
LTE/4G modem, WiFi 802.11ax, Bluetooth 5.3
2x LAN, USB3.0, 2x USB2.0 and 2x CAN bus
Up-to 3x RS485 | RS232 and digital I/O
Modbus RTU, Modbus TCP and MQTT
Secure boot, TPM and Hardware Watchdog
Custom I/O expansions boards
Hardware Specifications
CPU Core | |
| NXP i.MX8M Plus QuadLite, quad-core ARM Cortex-A53, 1.8GHz |
NXP i.MX8M Plus Quad, quad-core ARM Cortex-A53, 1.8GHz | |
NPU | AI/ML Neural Processing Unit, up to 2.3 TOPS |
Real-Time | ARM Cortex-M7, 800Mhz |
Memory and Storage | |
RAM | 1GB – 8GB, LPDDR4 |
Storage | 16GB – 128GB eMMC flash, soldered on-board |
Display and Graphics | |
Display Output | DVI-D, up to 1080p60 |
GPU and Video | GC7000UL GPU |
Network | |
LAN | 2x 1000Mbps Ethernet ports, RJ45 connectors |
| 802.11ax WiFi and Bluetooth 5.3 BLE |
| 4G/LTE CAT4 cellular module, Quectel EC25-E (EU bands) |
4G/LTE CAT4 cellular module, Quectel EC25-A (US bands) | |
SIM card socket | |
Cellular rubber duck antenna | |
GNSS | GPS |
I/O | |
| 2x USB2.0 ports, type-A connectors (back panel) |
1x USB3.0 port, type-A connector (front panel) | |
RS485 / RS232 | Up-to 3x RS485 (half-duplex) | RS232 ports |
| 1x CAN bus port |
Additional 1x CAN bus port | |
| 4x digital outputs + 4x digital inputs |
| 1x serial console via UART-to-USB bridge, micro-USB connector |
Support for NXP SDP/UUU protocol, micro-USB connector | |
Expansion Connector | Expansion connector for add-on boards |
System | |
RTC | Real time clock operated from on-board coin-cell battery |
Watchdog | Hardware watchdog |
| Secure boot, implemented with i.MX8M Plus HAB module |
TPM 2.0, Infineon SLB9670
| |
LEDs | 2x general purpose LEDs |
PoE | Support for PoE (powered device) |
Electrical Specifications | ||
Power Supply | DC input: unregulated 8V to 36V | |
Power Consumption | 2.5W - 8W, depending on system load and configuration | |
Mechanical Specifications | ||
Dimensions | 132 x 84 x 25 mm | |
Enclosure Material | Aluminum housing | |
Cooling | Passive cooling, fan-less design | |
Weight | 550 gram | |
Compliance | ||
Regulatory | FCC, CE, UKCA | |
EMC | EN 55032/5, EN 61000-6-2, EN 61000-6-3 | |
Safety | EN/UL/IEC 62368-1 | |
Reliability and Environmental | ||
MTTF | > 200,000 hours | |
Warranty | 5 years | |
Operation Temperature | Commercial: 0° to 60° C | |
Storage Temperature | -40° to 85° C | |
Relative Humidity | 10% to 90% (operation) | |
Pinout
TBA
Wiring Diagram
TBA
Status LEDs
TBA
Installation & Configuration
TBA