Page Comparison

...

The “Mobile Network” tab should be configured as shown in the image. The “APN” -

• Predefined Configuration > Custom

• PLMN > 42502

• LTE Band > chose 3,8, and 20

• APN > Depending on your mobile service provider

• APN Credentials > None

...

Upload

The “Upload” tab configuration should be done as shown in the image.

Step 1	Step 2	Step 3	Step 4

Image Removed

 

Image RemovedImage Removed

 

Image Removed

Week of month > check all the weeks Start Time > 0 0 Events per Hour > 1 Image Added

Hours of Day > check all the days Max. Event Delay > 0 Upload on Alarm > make sure the option is disabled Image Added

Months > check all the months Day of week > choose all the days Image Added

Protocol > HTTP HTTP/S Upload Method > POST Remote Server > organization name.galooli-systems.com/Swan/Up Remote Port > 80 Uploads Retries > 2 Image Added

Collect

The “Collect” tad configuration should be done as shown in the image.

Step 1	Step 2	Step 3

Step 4

Image Removed

 

Image Removed

 

Image Removed

 

Image Removed

 

wM-Bus Mode > Mode T&C, FF A&B Use Whitelist as stop condition > Activate the option Duration > 1000 Min. RSSI Limit > -108 DLL > make sure the option is disable Image Added	Upload after Collect >make sure the option is active Append > make sure the option is active Storage Interval > 0 Keep data on failed upload > make sure the option is active Image Added	Months > check all the months Days > check all the days of the month Image Added

Step 4	Step 5	Step 6

Step 7

Time > 0 0 Events per Hour > 1 Hours of Day > check all the days Image Modified

 

Max. Event Delay -> 0 Image Modified

Activate Event > make sure to disable Image Modified

Sync Collect

The “Sync Collect“ tab configuration should be done as shown in the image.

Make sure the “Sync Collect” is disabled.

...

Time

The “Time“ tab configuration should be done as shown in the image.

• NTP Server > In accordance with the organization's decision

• NTP Auto Sync (Days) > 0

• NTP Port > 123

• Time Zone (UTC offset) - The device must be configured to +0 time zone.

• Enable Daylight Saving Time > disabled

...

Write the Configurations

At the end of the procedure, click on "Write" and make sure everything is in order.

...