...
Schedule this script to run every 5-15 minutes. The scheduling will affect how much time the alarm should be active before the user is notified.
In the “Alarm State” variable, paste the unique identifier of the alarm you are interested in.
In the “Send Email” function, replace the email address to which the message will be sent.
The attached file must be downloaded to your computer and loaded into the Galooli automation solution once the data has been edited.
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
When a technician is performing maintenance on a generator on site, and it is known that some automation activates and affects the generator's engine, it is extremely important that all precautions are taken. For example, disconnect the communication between the generator and the Galooli gateway |
Unit Disconnection Notification
...
When the battery SOC (state of charge) is below 40% (or other threshold) start the generator to prevent loss of backup or downtime.
Important Remarks
TBA
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
When a technician is performing maintenance on a generator on site, and it is known that some automation activates and affects the generator's engine, it is extremely important that all precautions are taken. For example, disconnect the communication between the generator and the Galooli gateway |
Stop Generator When Battery Voltage Is High
...
Start the generator when battery voltage falls bellow 47V (or other threshold).
Important Remarks
TBA
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
When a technician is performing maintenance on a generator on site, and it is known that some automation activates and affects the generator's engine, it is extremely important that all precautions are taken. For example, disconnect the communication between the generator and the Galooli gateway |
Generators Working Mode Control
...