The Fleet tree provides a visual representation of an organization's hierarchical structure. The fleet is made up of the organization itself, the cluster, the group, and, eventually the unit (a vehicle).

Whenever the user clicks on an organization, cluster, group, or unit, the Fleet display changes accordingly.

...

...

The Hierarchy

Here is an explanation of the hierarchy of the organization tree - Organization Tree Section

...

Fleet Search Bar

The search bar allows you to locate specific vehicles within a cluster or group. By entering the name of the vehicle or cluster/group, the fleet tree will filter out the information that is not relevant.

...

In addition, you have the option of expanding or reducing all the clusters and groups of the organizational tree by selecting the following option:

...

Vehicle Status Modes

The following table contains the status icons and descriptions of their functionality:

In Hierarchy Menu	Functionality Description
Image Added	On Mode = Device is online and transmitting OTA via GSM, key is in ignition switch under ON.
Image Added	Off Mode = Device is offline as the engine of the car was shut down.
Image Added	Immobilized Mode = Upon triggering the immobilizer, once the vehicle comes to a full halt, the driver will not be able to turn on the engine again until the device is mobilized.
Image Added	No GPS Mode= The unit was unable to obtain GPS coordinates of its current location, and will not show up on the map view and / or the device was not able to connect to the server for over 48 hours.
Image Added	Disconnected Mode = The device was not able to connect to the server for over 48 hours.
Image Added	Idle Mode = Device is online and transmitting OTA via GSM, key is in ignition switch under ON , the car is running idle for over 5 minutes or is stuck in a traffic jam.

Property Value Display

One of the most interesting features of the Fleet platform is that it allows the user to instantly view performance data relevant to the unit itself.

This information can be selected using 4 individual icon controllers:

Icon	Application	Results Upon Selection
Image Added	Speedometer	Image Added
Image Added	External Battery Voltage	Image Added
Image Added	Vehicle Fuel Level	Image Added
Image Added	Odometer	Image Added

Location of the controllers:

...

Filtration Options

The Filtration Options sub-menu allows the user to filter out vehicles through the following means:

Filtration Name	Filtration Type	Selection Options	Image
Status	Check mark	On/Move Off Idle Disconnected Immobilized	Image Added
Battery Voltage	Top & Bottom threshold range	Setting an upper and lower threshold in order to control the unit selection options	Image Added
Fuel Level	Top & Bottom threshold range	Setting an upper and lower threshold in order to control the unit selection options	Image Added
Odometer	Top & Bottom threshold range	Setting an upper and lower threshold in order to control the unit selection options	Image Added

Location of the filtration sub-menu:

...

Upon utilizing any of the filtration methods, the filter icon will change its color to light green

...

Immobilize/ Mobilize tool

This feature is entirely dependent on the type of Galooli device you have & if it was installed with an immobilizer relay.

The user may “Immobilize” or “Mobilize” a particular vehicle at any time.

Location of the controller:

...

Upon clicking on the key controller, the user may click on immobilize or mobilize to execute the command

...