...
Device
As a list of accessories and devices supported by the Elara, each part changes depending on the element selected in the part above it.Force default Items
After selecting the device, the default parameters will appear automatically.Physical Device ID
המספר שרשום על היחידה עצמהThe ID that appears on the device itself.Virtual Device ID
מספר וירטואלי בתוך המערכת שלנו של הסנסור A virtual number within the Galooli system identifies the device.Linked Device
A way to configure multiple devices with the same virtual ID.The goal is to build one device that will combine data from physically different components (for example, the battery voltage from one device that measures voltage and the battery state of charge from another device that calculates percentage).
The "Linked Device" should be marked to identify the linked device. The device will be considered a primary unit if the "Linked Device" is not marked.
Device Baudrate
There are different frequencies of the units that need to be set properly and appropriately.
The different baudrates are:2400
4800
9600
14400
19200
38400
57600
115200
Parity Bit
Start Delay [mS]
Query Delay [mS]
Query Timeout [mS]
Query Retries
This parameter determines the number of times to remain in each register or object before concluding that communication is not normal. In general, the default value is 2 and this is the recommended value. it is recommended that you consult Galooli's support if you wish to change this value.