...
יש רקטיפייר:
מוסיפים את הרקטיפיירIn the event that a preliminary configuration process between Elara and the rectifier has already been completed, proceed to step 1.
If the configuration process between Elara and the rectifier is not required, proceed to step X.
Make sure the Elara connected to the HUB and to the Power Center
אין רקטיפייר:
אין רקטיפייר אז פשוט רושמים את הIP הדיפולטי של הDFUN בPOWER CNETER הRANGE ולא אותו מספר
...
לבדוק אלרה IP
לרשום IP נכון
add modbus Modbus eth driver
Chnage Change IP
ZonMAX >> LAYOUTAfter LAYOUT
After you have configured the ID of the device, you can now connect the AC meter directly to the Elara unit as described in the CE Transducer CE42 Installation document.Open the PowerCenter (if the power center was already open, close it, and re-open it).
Open the “Active Device” drop-down menu and select “Elara”.
Open the “Connect Via” drop-down menu and select the relevant Serial COM port.
...
7. In the Configure tab click the “Add Port 1 Device”.
...
8. The “Elara – Modbus Device Configuration” window will pop up:
...