Skip to end of banner
Go to start of banner

1.Power & Connectivity (Cabinet Tray/Box)

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 29 Next »

Required equipment:

  • Computer

  • RS485 Converter

  • Screwdriver

  • Communication Cables

  • Power Cables

  • SIM Card

  • SD Card

Instructions

  1. Connect the Cabinet Tray to a power source via Main Input Fuse.

    (warning) The (plus) should be connected to the red part and the (minus) should be connected to the black part. If the connection is made the other way around, it will cause a short circuit and can be very dangerous.

2. Open the Elara cover and make sure the SD Card is properly inserted.

Each unit should be fitted with an SD Card, on which all the configuration files of the Elara and the connected devices & sensor, will be on.

Place the SD card inside its designated slot, as shown in the pictures:

3. Make sure the SIM card s properly inserted.

Each unit should be fitted with a Nano SIM card (12.3mm x 8.8mm) which will enable cellular data communication between the Elara and Galooli cloud servers.

Insert the SIM into the device until you hear a click

4. Connect the backup battery (if it is not coming from the factory connected). Close the Elara cover at the end of the process.

5. Connect the green connectors to the Elara, this will supply power, and grounding, and extend its inputs to the gray terminal.

6. Connect the GSM antenna to its dedicated socket.

7. Make sure the Status LEDs are blinking as follows:

  • Status 1 LED is blinking Green color, one short blink every ~1 second

  • Status 2 LED is blinking Green color, short blinks

  • COM (Modem) LED is blinking fast, short blinks

8. If all three conditions are met proceed to the next configuration step - How to configure APN & Cloud Server.

  • No labels