Installation Preparation
Fuel tank (20L or 5.3 US gallons)
Fuel hand pump
RS485 To USB Converter & two 0.5mm thick communication cables. The length of the cables is determined by the distance between the RS485 to the USB converter and the computer
Assorted pair of screwdrivers
¾ inch hollow copper rod
Measuring tape
Zip-ties
35mm (1.4”) Bi-metal hole saw
Power drill
Fuel (Diesel, Gasoline)
Junction box – we recommend at least IP 65
Configuration Preparation
PC or laptop computer
Power Center installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
ZonMax installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
RS485 to USB converter - Refer here for driver installation instructions
Project’s Wiring diagram - Provided by Galooli Support
Note! Make sure your computer recognizes the COM port at the “Device Manager”. Otherwise, install the proper driver.