Skip to end of banner
Go to start of banner

Megmeet

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

image-20240908-055557.png

Supported Models

Communication Methods

Read/Write Community

MegaPower MC2600

RS485 - Modbus

Not Relevant

Network Configuration for RS485 Connection

Device Baudrate

 19200

MC2600 Wiring Diagram

  1. To connect the MC2600 rectifier to the Galooli gateway/tray, you must connect an RJ45 plug (ethernet cable) to the RS485 connection shown below.

image-20240908-112013.png

  1. The other side of the ethernet cable must be exposed . The RJ45 plug contains 8 small cables. The cables that you will need are 1 and 3 as shown in the diagram below.

image-20240908-113950.png

  1. The two cables should be connected to the Galooli gateway directly or to the Galooli gateway tray after they have been exposed.

Directly to the Gateway (Elara example)

image-20240908-114647.png

Galooli Tray Connection

TBA

MC2600 Configuration

TBA

  • No labels