Landis Gyr AC Meter (Supported Product)
The E650 offers high accuracy and long-term stability in energy measurement across all operational conditions. It features an advanced measurement system suitable for all network types, with flexible adaptation options to meet specialized requirements.
The Landis Gyr AC meter supports the DLMS communication method, which operates via both RS485 and Ethernet connections.
Supported only by Galooli RTU Gateways (Not supported by the Elara Gateway).
Supported Models & Communication Methods
Supported Models | Communication Methods |
|
e650 S3 e650 S4 e650 S4b |
Over RS485 & Ethernet |
RS485 Module (CU-E22)
Wiring/Pinout Diagram
The RJ12 socket of the RS485 interface has the following pin assignment.
Pin No. | Terminal | Signal |
|---|---|---|
1 | c | Signal Ground |
2 | a | Data a |
3 | b | Data b |
4 | b | Data b |
5 | a | Data b |
6 | c | Signal Ground |
Physical Installation
Strip one end of the cable and connect it to the Galooli Gateway. Connect the other end to the AC meter according to the diagram below.
Power Center Configuration
CU-XE111 (Ethernet Module)
Physical Installation
Connect the ethernet cable on one end to the Galooli Solution and the other end to the AC meter according to the diagram below.
Power Center Configuration
Supported Parameters
Power Center Parameters | System Parameters | Remarks |
|---|---|---|
Total Output KWH | AC_Meter_Grid.Total_KWH [KWH] |
|
Voltage Phase 1-3 | AC_Meter_Grid_X.V_L1-3 [V] |
|
Current Phase 1-3 | AC_Meter_Grid_X.I_L1-3 [A] |
|
Power Factor 1-3 | AC_Meter_Grid_X.PF_L1-2 |
|
*The system parameters were taken from the “AC Meter Grid” group of fields as a reference, but additional options are available.
Manufacturer Data