Ultragate Gateway

Ultragate Gateway

Ultragate gateway is an industrial computer that can be easily customized to meet your needs. Using the Ultragate gateway loaded with Galooli firmware, you can remotely manage, monitor, and control stationary assets, such as telecom sites, microgrids, rechargeable batteries, and generators.

A Ultragate device connects to all sensors, accessories, and devices, gathering data and sending it to the Galooli platform/servers.

ultragate-20241120-093959.jpg

Item Name

Galooli PN.

Item Name

Galooli PN.

Industrial Gateway - Ultragate

100-RTUSRULT-020

Configuration Cable for UltraGate Gateway

400-USBTUSB-333

External Backup Battery for Gateways, Incl. Wire Harness

300-BatGatway-011

Features

  • Stable network transmission without downtime.

  • Abundant interfaces.

  • Multiple serial ports maximizing compatibility with external devices.

  • Customized expansion boards, allowing for custom expansion.

  • Convenient installation with options for mounting.

  • Supports GPS positioning.

Hardware Specifications

Operating System

Ubuntu 2

Operating System

Ubuntu 2

Processor

Quad-core ARM Cortex-A55 64bit CPU, up to 2.0GHz,RK3568

Modem

Quectel LTE EG25-G

RAM

DDR4 4GB

Memory

eMMC 32GB

In general, the Ultragate Gateway can support log storage for at least 60 days while offline.

NPU

1TOPS NPU, Support Caffe/Mxnet/TensorFlow/TF Lite/ONNX/Darknet models

 

 



Network Interface

Dual 10/100 Ethernet ports

2.4GHz/5.8GHz Wi-Fi 802.11b/g/n/ac (Optional)

4G mobile network

Bluetooth (Optional)

SNMP Protocol – Supports SNMP v1/v2c/v3

Defaulted IP:

  • ETH 0 Port 1: 192.168.1.11 - Service port (and secondary device port, if needed).

  • ETH 1 Port 2: 192.168.100.55 - Main device ethernet port.

 

 

 

 

SIM

  • 1*SIM slot Nano-SIM(4FF).

  • The eSIM option is available for clients who require it in applicable models.

Each unit includes a sticker on the box (external) and on the back of the device, indicating whether the gateway model supports eSIM.

 

image-20250416-081811.png
eSIM-Supported Model

GL → Galooli unit from new version
E → Indicates eSIM assembly
SA → Represents the eSIM provider or country
ICCID → If eSIM is assembled, the ICCID of the SIM will be displayed

image-20250416-081712.png
eSIM-Not Supported Model

 

SIM Card Data Usage

Based on a daily data usage test performed on the Ultragate gateway with a rectifier, fuel sensor, and AC and DC meters connected, the estimated monthly usage is approximately 150–200 MB.


LTE Frequency Bands

LTE-FDD B1/3/5/7/8/20
LTE-TDD B38/40/41
WCDMA B1/5/8
GSM/EDGE B3/8




GNSS

GPS, GLONASS, BDS, Galileo and QZSS
Protocol: NMEA 0183
Data update rate: 1 Hz by default
Sensitivity:
Acquisition Autonomous -146 dBm
Tracking Autonomous -157 dBm
Accuracy: Autonomous @ open sky 2.5

Display

1*HDMI OUT 2.0 ,4K 60fps

RTC

Built-in real-time clock battery, supports scheduled power on/off.


USB

1*USB3.0 HOST
1*USB3.0OTG


LED Indicators

WORK When the device is working properly, it blinks for 1s frequency
POW on when the gateway is powered up
DI n - on when the channel is activated by input signal
DO n - on when the channel output is activated

Can bus

1 CAN2.0 as default. CAN J1939.

*The unit always operates in CAN Silent Mode.

Button

1*upgrade for OTA, REC

Serial Ports

2*RS232 ,2*RS485

EMC level: IEC61000-4-2ESD, Level 2, class B, contact 4KV, air4 KV

Serial Signals

RS-232 5V/3.3V(output), TxD, RxD, GND
RS-485 5V/3.3V(output),A,B, GND



IO Interfaces

4 DI: dry/wet contact
DI voltage range 0-36V (Max. 36V), High 5-36V, Low 0-2V
2 DO: Relay
DO Max. 10A-277VAC/28VDC for NO,5A-250VAC for NC
4 AI: Voltage range 0-15v (Max.18V); Analog input Current range 4~20mA (Max. 40mA)
EMC level: IEC61000-4-2, Level 2, class B, contact 4KV, air 4KV


Power Supply

DC12V/2A
Connector: Jack Barrel Type DC5.5*2.1mm Round socket or 2 PIN terminal block
EMC level: IEC61000-4-2, Level 2, class B, contact 4KV, air 4KV

If the Ultragate gateway is connected to the Galooli Tray/Metal Box via the SPD, a 13.5V charging voltage is required.

Power Consumption

Theoretical value - 24W

Backup Battery

An external 12V lead-acid battery can be connected through a battery charger with an SPD (Surge Protection Device).

Operating Temperature

-10 - 70°C

Storage Temperature

-20 - 85  °C

Humidity

5% - 80%

Dimension & Weight

210mm*106mm*50mm
1.4 KG

Installation

Panel mounting, DIN-Rail mounting



Ingress Protection (IP Code)

IP30.

  • If the Gateway is installed in a Galooli cabinet tray and the tray is inserted into a communication cabinet, then the IP Code is determined by the specific communication cabinet being used.

  • When the Gateway is inserted into Galooli's Metal Box Set, it will have IP codes corresponding to the Metal Box Sets - IP65

 


Certificate

Pinout

image-20241120-084526.png
image-20251111-091904.png

 

Front - from left to right

Top Side

Top Side

Pin#

Name

Description

Type

1

V1+

Voltage1 +

 

 

 

Analog

In order to connect the Ultragate analog inputs, the connections should be made in the following order:

Ultragate V > Tray U-AN

Ultragate COM > Tray GND

 

 

 

 

2

I1+

Current1 +

3

Com1

N/A

4

V2+

Voltage2 +

5

I2+

Current2 +

6

Com2

N/A

7

V3+

Voltage3 +

8

I3+

Current3 +

9

Com3

N/A

10

V4+

Voltage4 +

11

I4+

Current4 +

12

Com4

N/A

13

V+

Voltage +

 

 

 

Digital

In order to connect the Ultragate digital inputs, the connections should be made in the following order:

Ultragate D > Tray U-D

Ultragate COM > Tray GND

14

V-

Voltage -

15

D1

Digital 1

16

Com1

N/A

17

D2

Digital 2

18

Com2

N/A

19

D3

Digital 3

20

Com3

N/A

21

D4

Digital 4

22

Com4

N/A

Bottom Side

Bottom Side

Pin#

Name

23

HDMI

24

AUD

25

ETH 0 - Service port (and secondary device port, if needed)

26

ETH 1 - Main device ethernet port

27-28

2 - USB 3.0

 

 

29-30

2 - RS485

image-20240916-121509.png
Communication Pinout

 

 

 

 

 

 

 

 

31-32

2 - RS232

image-20251111-093117.png

NO.

Definition

Property

Description

2

TX/A

Output

Send (TX/A)

3

RX/B

Input

Receive (RX/B)

4

GND

Ground

Ground wire

 

In Power Center, set port 3 for the first RS232 and port 4 for the second RS232.

33

SIM

 

 

 

34

Main 4G connection

image-20241121-094856.png

35

Diversity 4G connection

36

Wi-Fi

37

GPS

Back - from left to right

image-20250518-063744.png

Pin#

Name

Description

Type

Pin#

Name

Description

Type

 

1

NO1

Normally Open 1

 

 

 

Output

COM1

Common 1

NC1

Normally Closed 1

 

2

NO2

Normally Open 2

COM2

Common 2

NC2

Normally Closed 2


3


H L G

H = High
L= Low
G = Ground

 

CAN J1939

4

DC 12V/2A

Power Input

 

Dimensions

image-20241120-085140.png

Ultragate Installation & Configuration

https://galooli.atlassian.net/l/cp/QMKDyXdx