Site Shelter Card

On the Shelter card, you can view the different components installed in the shelter of the site, as well as the data that has been collected. The card will appear on the screen only if the site layout contains "INDOOR".

Main View

• Temperature

• Door Status (Closed/Open)

• Air Condition

Open

Expanded View

• Outdoor Temperature – Indicates the current outdoor temperature.

• Room Temperature - Indicate whether at least one of the configured temperatures is true. In this case, the maximum temperature from all configured shelters is displayed.

  • Humidity - Shows the current indoor humidity level and indicates if it exceeds the configured threshold

  • Air Condition - Displays the status (On/Off), mode (Cool/Heat), and current temperature for each air conditioning unit.

  • Fan - Shows the status (On/Off) and operating value (e.g., speed or temperature) for each fan.

  • Free Cooling Fault - Indication of a fault in the Free-Cooling system. This refers to a general hardware-related issue, not a high-temperature condition.

• Alarm Galooli

  • Room Temperature – Triggers if room temperature exceeds the configured limit.

  • Humidity – Triggers if humidity exceeds the defined threshold.

  • Air Condition – Triggers for temperature deviations or malfunction in any air conditioning unit.

  • Fan – Triggers if fan operation is outside expected parameters.

• Alarm Internal

  • Fan – Indicates internal fan-related errors or anomalies.

  • Smoke – Active if smoke is detected.

  • Door – Indicates if the internal door is closed or open.

  • Motion – Active when motion is detected inside the shelter.

  • Vibration – Triggers when unusual vibration is detected.

Open