DC Energy Meter - Multi Channel 6CH - SSET
6 channels DC energy meter (With External DC Current Hall sensor).
Features
Measures DC voltage, current, power, and energy
Supports multi-channel DC measurement
RS485 communication (Modbus protocol)
Compatible with Hall effect current sensors
High accuracy and real-time monitoring
Built-in alarm and data storage functions
Supported Models & Communication Methods
Model | Galooli PN. | Communication Method |
CE-NDC-MULTI-07-2.0 | 400-DCMeterSSET-6CH-516 | RS485 (Modbus) |
Technical Specification
Voltage range | 12-60v |
Channels | 6 |
Communication | RS485, baudrate 19200bps |
Meter voltage reading accuracy | ±0.50% |
Meter current reading accuracy | ±2.00% |
Overall kwh accuracy | ±2.50% |
Additional required units (CT Rings) | |
Standards and Certifications |
|
CT Rings
https://galooli.atlassian.net/wiki/x/ngAAGwE
Wiring/Pinout Diagram
Pin number | Description |
|---|---|
1 | RS485 - A |
2 | RS485 - B |
3 | DO NOT USE |
4 | DO NOT USE |
5 | Power Supply + |
6 | Power Supply - |
8 | Access port for Hall Effect transducer |
Physical Installation
Meter Installation
TBA
CT Rings Installation
TBA
Device Configuration
Meter Configuration
TBA
CT Rings Configuration
The meter can be connected to two types of DC Current Rings: 100A and 500A. Both can be connected simultaneously or separately, but appropriate configurations must be applied.
Case 1 – Replacing a 100A ring with a 500A ring or vice versa.
Case 2 – Using both 100A and 500A rings simultaneously (connected to separate input channels).
Power Center Configuration
Manufacturer Data