How to add parameters to calibration table?

Owned by arkadi kaplon
Last updated: 24.10.23
2 min read

Users can add parameters manually to the table by performing the following stages:

Step 1: Select Calibration type - Click the Type of calibration to open a list of table types. Select the most relevant one from the list.

Step 2: Select what units the values should be measured by opening the Dimension dropdown

Step 3: Fuel Mode - In the case of fuel calibration, select the type and purpose of the fuel tank. In case an external sensor is used for calibration, check the external power sensor.

Step 4: Enter values in the table by clicking on the + icon.