Polarium (Modbus)
Supported Models
Polarium
Communication Method
RS485 (Modbus)
Wiring Diagram
Pinout | RJ45 bottom side ports |
4 | RS485 A |
5 | RS485 B |
6 | RS485 GND |
Network Configuration
Device Baudrate | 9600 |
|---|---|
Device ID | Module ID is automatically set by the master module to be 1...N (according to the device count configured) The Polarium batteries are limited to a maximum of 14 batteries connected to the same battery management system (BMS) as the master battery and Galooli supports this volume with one Elara gateway.
%20(003)-20220307-104909.jpg?version=1&modificationDate=1646830319234&cacheVersion=1&api=v2&width=204&height=362) |
| Configuration Software Download Link |
Version Update
Polarium batteries can be updated using a specific mechanism built as a service. As a result, we are able to remotely connect to Polarium batteries and update them with the latest version.
Please contact the Galooli support team for more information.
Alarms List
Critical | Urgent | Non Urgent | Observation |
|---|---|---|---|
"Circuit breaker alarm" | "CLD active indicator" | "Charge stop indicator", | |
"Anti-theft alarm" | "Balanced cells indicator" | ||
"Short-circuit alarm" | "Non-quiescent state indicator" | ||
"Over-current discharge alarm" | "Charge stop ready indicator" | ||
"Over-temperature alarm" | |||
"Under-voltage alarm" | |||
"Over-voltage alarm" | |||
"Discharge blocked alarm" | |||
"Under-temperature alarm" | |||
"Over-current charge alarm" | |||
"Charge blocked alarm" |
Polarium (SNMP)
By utilizing the rectifier (currently supported by Delta and CFX) the information from the Polarium smart batteries can be read via SNMP.
Supported Models
To be announced
Communication Method
SNMP (Ethernet)
Wiring Diagram
Same as RS485 (Modbus) - Polarium (Modbus)
Network Configuration
Device IP | 192.168.70.2 |
|---|---|
Device ID | Same as RS485 (Modbus) - Polarium (Modbus) |
Configuration Process | Same as RS485 (Modbus) - Polarium (Modbus) |
Version Update
To be announced