Skip to end of banner
Go to start of banner

Polarium Batteries

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 26 Next »

Polarium (Modbus)

  • Supported Models
    Polarium

    The Polarium batteries are limited to a maximum of 14 batteries connected to the same battery management system (BMS) as the master battery and Galooli supports this volume with one Elara gateway.

     

  • Communication Method
    RS485 (Modbus)

  • Wiring Diagram

Pinout

RJ45 bottom side ports

4

RS485 A

5

RS485 B

6

RS485 GND

  • Network configuration

Device Baudrate

9600

Device ID

Module ID is automatically set by the master module to be 1...N (according to the device count configured)



Configuration Process

Configuration Software Download Link

Version Update

Polarium batteries can be updated using a specific mechanism built as a service. As a result, we are able to remotely connect to Polarium batteries and update them with the latest version.

Please contact the Galooli support team for more information.

Alarms List

Critical

Urgent

Non Urgent

Observation

"Circuit breaker alarm"

"CLD active indicator"

"Charge stop indicator",

"Anti-theft alarm"

"Balanced cells indicator"

"Short-circuit alarm"

"Non-quiescent state indicator"

"Over-current discharge alarm"

"Charge stop ready indicator"

"Over-temperature alarm"

"Under-voltage alarm"

"Over-voltage alarm"

"Discharge blocked alarm"

"Under-temperature alarm"

"Over-current charge alarm"

"Charge blocked alarm"

Polarium (SNMP)

By utilizing the rectifier (currently supported by Delta and CFX) the information from the Polarium smart batteries can be read via SNMP.

  • Supported Models
    TBA

     

  • Communication Method
    SNMP (Ethernet)

  • Wiring Diagram

Pinout

RJ45 bottom side ports

4

RS485 A

5

RS485 B

6

RS485 GND

  • Network configuration

Device IP

192.168.70.2

Device ID

Module ID is automatically set by the master module to be 1...N (according to the device count configured)

Configuration Process

Configuration Software Download Link

Version Update

To be announced

Alarms List

To be announced

  • No labels