Skip to end of banner
Go to start of banner

Manager Version - Future Version

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

The latest version of the Manager application includes features that reflect open dialogue with our customers and Galooli’s desire to facilitate and improve system usage. This article contains information about the main features.

  • Generic Generator Layout Update
    A generic generator layout (GEN_GENERIC) has been updated to support Elara gateway in addition to K2 gateway, which is already supported.
    The primary purpose of this update is to allow the display of the generator connected to the Elara gateway in the Panorama application and the mobile application when only the generator and fuel have been installed on site.

    Sensors, accessories, and devices can be connected to the Elara gateway, but the data from those sensors will only be displayed in the "Table Mode" and all reporting features, not in the live view of the generator.

    Full Document - Device Configuration
    Full Document - Generator Unit View

  • Layout Code Upgrades
    From now on the tenants list of a telecom site is affected by the layout code only. You can find the layout code of each site in the Device Configuration tab and the list of all the tenants related to the site in the Additional Information section.

    Full Document - Device Configuration

  • X-Ray Management - File Uploading Process
    Check out the new knowledge document regarding the X-Ray Management - File Uploading Process.
    Full Document - https://galooli.atlassian.net/wiki/spaces/KP/pages/2915762177/X-Ray+Management#File-Uploading-Process

  • X-Ray Items Removal
    A number of X-Ray items have been removed from the “Additional Information”:
    -Communicating Rectifiers
    -Solar Converter Communicating

  • Linked Units Feature Enhancement
    A recent update to the "Linked units" feature now offers customers the option of not overwriting some parameters between linked units. Currently, the option applies to tenants and Aircraft Warning Lights (AWLs) parameters. For this purpose, simply write down the unit ID, add a semicolon (;), and then write (-Tenants) or (-AWL).

    Full Document - Installation Setups

  • Maintenance Tab
    The "Next Maintenance Working Hours" field has been renamed to "Next Maintenance Engine Hours" and a new field, “Next Maintenance Engine Hours 2”, has been added. All platforms have been updated, including the reports in the Pro Application.

  • No labels