Skip to end of banner
Go to start of banner

Elara Industrial Gateway 2020 (Old generation)

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Current »

This model is not available for sale

Description name

Item Code

Elara Smart Controller 2020 [EMEA Region]

100-Elara001BB-020

Elara Smart Controller 2020 [GLOBAL]

100-Elara001BB-020 EG21

Features

  • Wide working voltage range (12-60v)

  • Daisy Chain Support - Connecting different accessories to the same wires rather than running two separate wires from each meter

  • Small Size (2 DIN Rail Modules)

  • Easy installation

  • Support 4G/3G/2.5G cellular communication

  • SIM on-chip (option)

  • Full OTA configuration process

  • OTA firmware upgrade

  • Easy LED Status Display

  • On-Board Ethernet port

  • On-Board RS485 Protected port (2 ports)

  • Analog Inputs

  • Digital Output (Open collector)

  • External GSM Antenna

  • On-Board GPS (Internal Antenna)

Hardware Specifications

General Specifications

Power Supply

12-65 v

 

Power Consumption

Full power mode

0.75W

Low Power mode

0.5W

Stand-by mode

0.25W

OTA (Over The Air) Connection

A voltage of at least 3.5 volts is required for the OTA connection

 

Backup battery

Type

Li-Ion (950mAH)

Working Time

Between 10 – 12 hours

 

GSM/GPRS

Antenna type

Internal

LTE, UMTS/HSPA(+) and GSM/GPRS/EDGE coverage

SIM Card Type

Nano SIM slot

 

SIM Card Data Usage

The SIM card data usage may change depending on its use. As an example, cut-through tools increases data usage.

 

 

 

GNSS

Antenna type

Internal

 

 

GNSS Systems

99 acquisition channels

33 tracking channels

GPS Support

GLONASS Support

Sensitivity

-167 dBm

 

Main Serial Communication

Type

RS485 Protected Ports

Surge Protection

IEC 61000-4-5 Class 4

 

 

Secondary Serial Communication

Type

RS485 Protected Ports

(Hardware dependent)

Surge Protection

IEC 61000-4-5 Class 4

 

Analog Inputs

Count

5

Voltage Range

0-15v

Type

Voltage / Temperature / Pulse Counter

 

Outputs

Count

1

Type

Open Collector

 

 

Ethernet Port

Ports

1

Interface Standard

8 pin RJ45

Network interface protection

2KV electromagnetism isolation

shell insulation blocking

 

 

Memory logger

Type

Micro-SD card

 

 

Size (Messages)

An 8GB SD card is included with the Elara.

Please refer to the following link for more detailed information regarding the storage.

https://galooli.atlassian.net/l/cp/J1k2z4wT


Bluetooth

Protocols

Bluetooth v4.2 BR/EDR and BLE specification

 

Movement detection

Type

MEMs

Axes

3

Storage Temperature

-40 - 85 Celsius

Working Temperature

-20 - 70 Celsius

Max. Relative humidity

90%

Weight

154gr (No Battery) 

176gr (Battery included) 

Size

Width 85.5 x Length 86mm 

Height 63mm 

Daisy Chain Support

Connecting different accessories to the same wires rather than running two separate wires from each meter

Analog Inputs Specifications

Reading Voltage range

0-15V

Reading Resolution

10mV

Reading Accuracy (max error)

2%

Max input voltage

18V

Pulse Counter specifications

Pulse threshold voltage

4v

Max Frequency

100Hz

Test condition

50% duty cycle
Positive voltage 10v

Analog Outputs Specifications

Output Type

Open Collector

Max. Continuous working current

150 mA

Over Current protection

200 mA (Aprox.)

Maximum working voltage

18 V

External Voltage Measurement

Max voltage

75V

Resolution

0.03v

Accuracy

0.1v

Temperature Measurement

Active temperature range

[-20,70] [C]

Reading Accuracy

1 [C]

Reading Resolution

0.1 [C]

GNSS Specifications

Antenna

On-Board

 

GNSS Features

GPS L1 Band Receiver (1575.42MHz)

GLONASS L1 Band Receiver (1601.71MHz):

Channel: 33 (Tracking)/ 99 (Acquisition)

Horizontal Position Accuracy

Autonomous: <2.5m CEP

Reacquisition Time

<1 SEC

 

TTFF @-130dBm

Cold Start: <15s

Warm Start: <5s

Hot Start: <1s

 

Sensitivity

Acquisition:: -149dBm

Tracking: -167dBm

Reacquisition: -161dBm

 

Dynamic Performance

Maximum Altitude: Max. 18000m

Maximum Velocity: Max. 515m/s

Maximum Acceleration: 4G

Modem Specifications

GLOBAL (USA and rest of the world) Item Code

EG21GGB-128-SGNS

Europe, the Middle East and Africa Item Code

EC200AEUHA-N06-SNASA

Antenna

External

 

 

Frequency Bands

LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/

B19/B20/B25/B26/B28

LTE-TDD: B38/B39/B40/B41

WCDMA: B1/B2/B4/B5/B6/B8/B19

GSM: B2/B3/B5/B8

Data

LTE / UMTS / GSM

 Approvals – Carriers

Deutsche Telekom* (Europe)

Verizon*/AT&T*/T-Mobile* /Sprint* (North America)

 

 

 

 

 Approvals – Regulatory

GCF (Global)

CE (Europe)

FCC/PTCRB* (North America)

IC (Canada)

Anatel (Brazil)

IFETEL (Mexico)

KC* (South Korea)

NCC (Taiwan, China)

JATE/TELEC (Japan)

RCM (Australia)

ICASA* (South Africa)

This is a class-A Product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

System Status1 LED 

General Device Status 

State 

Pattern 

Color 

Working condition 

One short blink every ~1 second 

(50mS On, 1000mS Off) 

Green 

“Direct Comm” mode (Remote commands) 

Fast blinks 

(100mS On, 100mS Off) 

Green 

System Status2 LED 

SD Status 

State 

Pattern 

Color 

SD Activity 

Short Blink 

(100mS) 

Green 

No SD Card detected 

Fast blink 

(100mS On, 100mS Off) 

Red 

Missing / Corrupted Configuration file 

Slow blink 

(100mS On, 750mS Off) 

Red 

Modem State LED 

Connection State 

Color 

No Connection to host 

Red 

Host Connected 

Green 

Network State 

Pattern 

Network Searching 

Slow Blink  

(1800mS On, 200mS Off) 

Idle 

Slow Blink  

(200mS On, 1800mS Off) 

Data 

Fast Blink 

(125mS On, 125mS Off) 

Pinout

Pin#

Name

p1

PWN IN

p2

GND

p3

A1

p4

B1

p5

A2

p6

B2

PE1

EARTH1

PE2

EARTH2

PO1

OUT

PO2 (SW)

IN5

PO3

IN4

PO4

IN3

PO5

IN2

PO6

IN1

ETH

Ethernet connection

GPS Support

There are different actions within the Elara gateway that relate to the GPS location behavior.

When the GPS data is transmitted by the Elara to the server?

  • Automatic Location Report
    The Elara gateway will update the location every time a status transmission is made to the server if the "Report Location" option is configured.

     

  • “Information” Button
    When you click on the "information" button, the Elara location is requested and sent to the server. The location will be displayed only in the Power Center.

 

  • “Request Location”
    When you click on the “Request Location” button the server is force the Elara to send the location to the server. Based on the last GPS data, this location is transmitted to the server to set the unit's location on the map.

When the Elara map location is updated by the server?

  • Not a stationary asset & no layout code configured
    With each transmission, the position of the unit is updated on the map, unless the longitude and latitude are 0,0 in which case it is not updated on the map.

  • Stationary Asset

    • In the event that the unit has transmitted a location more than 50 meters away from its previous location then the location of the unit will be updated on the map.

    • In the event that you request a location with the "Request Location" command, and only in the next transmission status the location will be updated on the map.

  • No labels