Skip to end of banner
Go to start of banner

Wind Turbine Story

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The story will appear if Wind_Turbine_1.Configured is true.

Location: After Rectifier 1-5 stories.

  1. Story Title - Wind Turbine

  2. Subtitle - Wind_Turbine_1.Device_Type - if there is no value, do not display any text

  3. Disconnected icon - appears if the object is disconnected. (Wind_Turbine_1.Disconnected)

  4. Alarms button - number and severity of alarms. If there are no alarms, display a green button with the text "No Alarms".

    1. The alarms include all digitals with severity in the Wind_Turbine_1 object. Currently the relevant alarm is Wind_Turbine_1.Disconnected

  5. Sub-card 1:

    1. Title - Power

    2. Power - Wind_Turbine_1.Output_Power [W], precision 0, units-W

    3. Voltage - Wind_Turbine_1.Output_Voltage [V] - precision 1, units-V

    4. Current - Wind_Turbine_1.Output_Current [A] - precision 1, units-A

  6. Sub-card 2:

    1. Title - Turbine

    2. Wind Speed - Wind_Turbine_1.Wind Speed - precision 0, units - m/s

    3. Wind Direction - Wind_Turbine_1.Wind Direction - precision 0, units - degrees

    4. Turbine Enabled - Wind_Turbine_1.Turbine Enabled. Display "Yes"/"No"

    5. Rotor Speed - Wind_Turbine_1.Rotor Speed - precision 0, units - RPM

    6. Yaw Direction - Wind_Turbine_1.Yaw Direction - precision 0, units - degrees

    7. Clutch Engaged - Wind_Turbine_1.Clutch Engaged. Display "Yes"/"No"

Remarks:

  1. Don't display 0 values.

  2. When the turbine disconnected, values (if not 0s) should be greyed as disabled

  3. Note that there are no degrees in the Figma for the "Direction" values - make sure to add them

  • No labels