Installation Preparation
Fuel tank (20L or 5.3 US gallons)
Fuel hand pump
The calibration tube will be assembled by the client*
RS485 USB to serial configuration cable and adaptor
Assorted pair of screwdrivers
¾ inch hollow copper rod
Measuring tape
Zip-ties
35mm (1.4”) Bi-metal hole saw.
Power drill
Fuel (Diesel, Gasoline)
Junction box – we recommend at least IP 65
Configuration Preparation
PC or laptop computer
Power Center installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
ZonMax installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
RS485 to USB converter - Refer here for driver installation instructions
Project’s Wiring diagram - Provided by Galooli Support
Note! Make sure your computer recognizes the COM port at the “Device manager”. Otherwise, install the proper driver.