Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 13
Next »
AWL Troubleshooting
How to Detect the Fault? | Fault Description | Troubleshooting Steps |
|---|
There is no light coming from the AWL
|
The AWL is not receiving power
| The sections should be progressed according to the solution Make sure the power switch of the AWL is turned on
During the light hours, cover the AWL light sensor to make the AWL turn on, and check if the AWL works properly.
Check the AWL in the evening or at night
The tower bulb or the entire AWL system needs to be replaced
|
Power Center Communication Troubleshooting
How to Detect the Fault? | Fault Description | Troubleshooting Steps |
|---|
There is no indication on the Power Center that the AWL is functioning
תמונה
| Although AWL is working properly, there is no indication of that in the Power Center | The sections should be progressed according to the solution Make sure the AWL works with AC current (click here for AWL that work with DC current) Make sure the cable connection between Elara/Tray/Metal box and AWL is proper. Ensure that the cables are connected properly and that they are not torn The connections should be connected as described in the wiring diagram provided by Galooli
|