...
Supported Models | Communication Methods | Read/Write Community |
Eltek_SmartPack | RS485 | Not Relevant |
|
| Read - public |
Eltek_SmartPack2Touch |
| Read - v1community |
Eltek_SmartPackS |
|
Network Configuration for ETHERNET/SNMP Connection
...
Username - admin
Password - admin
...
SmartPack2 Configuration
...
Smart_Pack2 Touch
...
+ SmartPack S Installation & Configuration
Now that you have installed the appropriate gateway on site, it is time to connect it to the rectifier via the ethernet interface that is supported by the SmartPack 2 touch and SmartPack S.
Connect the Galooli gateway to the rectifier using an Ethernet cable. The technical booklet will specify the specific name, model, and port of the gateway.
In order to configure the Power Center and Galooli solution, please refer to the relevant links for your gateway.
Gateway | Link |
---|---|
Elara | |
TechBase |
SmartPack2 & S Touch SNMP Configuration
...
4. Check the “Web-based configuration” to enable the web SNMP configuration.
...
SNMP is now available
Supported Parameters (SNMP)
Power Center Parameters | Power Center Parameters | System Parameters | Remarks |
---|---|---|---|
Total_Output_KWH | Rectifier_X.Total Load Energy [KWH] | ||
Voltage | Rectifier_X.U_System [V] |
| |
Current | Rectifier_X.I_Load | ||
Battery_Current | Rectifier_X.I_Battery | ||
Battery_SOC_Percentage | Rectifier_X.State_Of_Charge | ||
Battery_Temperature | Rectifier_X.Temperature_Battery [Celsius] | ||
Internal_Temperature | Rectifier_X.Temperature_Internal [Celsius] | ||
Solar_Curent | Rectifier_X.Solar_Current [A] | ||
Solar_KWH | Rectifier_X.Solar_Total_Power [KWH] | ||
Solar_1-8_Voltage | Solar_1-4_Voltage | Rectifier_X.Solar_Voltage_X [V] |
|
Solar_1-8_Current | Solar_1-4_Current | Rectifier_X.Solar_Current_X [A] | |
DG_Signal | Rectifier_X.Generator Signal | ||
Rectifier_Current |
| Rectifier_X.I_Rectifier [A] | |
Installed_Modules |
| TBA | |
Installed_Solar_Modules |
| TBA |
|
Faulty_Modules |
| TBA |
|
Faulty_Solar_Modules |
| TBA |
|
Supported Parameters (RS485)
Power Center Parameters | System Parameters | Remarks |
---|---|---|
Serial-1 | TBA | |
Total_Output_KWH | Rectifier_X.Total Load Energy [KWH] |
|
Solar_KWH | Rectifier_X.Solar_Total_Power [KWH] |
|
Rectifier_Current | Rectifier_X.I_Rectifier | |
Battery_Temperature | Rectifier_X.Temperature_Battery [Celsius] | |
Current | Rectifier_X.I_Load | |
Voltage | Rectifier_X.U_System [V] | |
Battery_SOC_Percentage | Rectifier_X.State_Of_Charge | |
Digital_Inputs | TBA | |
Digital_Outputs | TBA | |
Solar_Curent | Rectifier_X.Solar_Current [A] |