...

• Choose the "Configuration" tab, double click on the existing device, click on the “Port” line and click on “Add item”.

  

• The following wizard will allow you to choose the first “Assignment” and specify the different parameters for that assignment. You can find all the data in the technical specifications/datasheet of the product. If necessary, you may need to contact the manufacturer. Complete the process by applying the changes.
  Listed below are Galooli's recommendations for the required assignments.
  Add the first assignment, fill in the parameters using the technical specification manual that came with the device, and apply the changes.
  

  

• Click "Write configuration", wait until the process is complete, and then click "Reset".
  

  

...

• Click on the "Status" tab, open the relevant device option, and compare the Power Center value of the register assignment you added in the previous step with the actual value. Thus, you will be able to verify the accuracy of the readings in Power Center.
  

  

• Repeat the process for each register assignment separately. After each new register assignment is added, be sure to click "Write configuration", wait until the process has been completed, and then click "Reset". For each new registerassignment , make sure to verify the receiving of data each time.
  

• Ensure that all relevant alarms are listed, as well as any remote control parameters. The technical specifications/datasheet of the product contains all the relevant information. You may need to contact the manufacturer if necessary. Apply the changes to complete the process.
  

• Click "Write configuration", wait until the process is complete, and then click "Reset".

10. The configuration that you have made must be saved by clicking on "Save As", which will create a GIB file that is required for the next steps.
    

    

11. Submit a support ticket through the Galooli solution to the Galooli support team. The ticket should contain the following information:

    1. Describe your request for the creation of a new default integration with a new hardware product

    2. Provide the full name, model, and method of communication of the product

    3. Let Galooli know what hours and days the unit will be connected to a power source and the network so that they may conduct their own tests

    4. Upload the GIB file

    5. Include all technical documents related to the product

Galooli Recommended Assignments

Using Galooli's recommended assignments requires finding the appropriate protocol, locating the assignments, and returning to the last paragraph you reviewed.