Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Extremely low power consumption

  • Small size

  • Easy installation

  • Support 4G/3G/2.5G cellular communication

  • SIM on chip

  • Full OTA configuration process

  • OTA firmware upgrade

  • Epoxy coverage (option)

  • Configurable LEDs behavior (for better in-battery concealing)

  • Physical measurements: Voltage, Current, Temperature, Internal resistance

  • On-Board Movement sensor

  • On-Board Temperature sensor

  • On-Board GPS (Internal Antenna)

Galooli Part Number

Description

100-Sparta-EABT

Sparta Tracker (eSIM,2G&4G )

Sparta - North America/EMEA/Asia (2G/4G)  

eSIM,Box,2G/4G

100-Sparta-EBBT

Sparta Tracker (eSIM,2G&3G )

Sparta - Central and south America/EMEA/Asia (2G/3G) 

eSIM,Box,2G/3G

100-Sparta-ECBT

Sparta Tracker (eSIM,2G&3G&4GE )

Sparta - EMEA/Asia (2G/3G/4G) 

eSIM,Box,2G/3G/4G(Europe)

100-Sparta-EDBT

Sparta Tracker (eSIM,2G&3G&4GE )

Sparta - North America (2G/3G/4G)

eSIM,Box,2G/3G/4G(North Amrica)

Hardware Specification

General specifications

...

The unit will begin transmitting its location every minute (default setting) to allow for tracking and tracing. Once the unit remains 10 minutes (default setting) with no movement, it returns to In-Cabinet Mode.

...

.

...

Switching Between Modes

It is possible to switch between the different modes when physically connected to the Sparta (Serial Connection) or when connecting wirelessly (OTA - while the unit is connected to the server).

Important Note - You can switch from "In Cabinet" mode to "Maintenance" mode only when the Sparta is connected to the server. The timing depends on the Sparta's configuration.

Maintenance State Timeout

When Sparta gateway is in one of the following modes: "Storage", "In Cabinet", or "Tracking”, and for some reason, switches to "Maintenance" mode, it will automatically return to the previous mode after one hour, with the exception of the following:-

  • Every communication with the host (serial of remote) will reset the 1-hour timer.

...

  •  If the device is manually set back to maintenance mode (using the power center button), the device will
    remain in maintenance forever.

  • Status is set by the unit itself.

Sparta Status Logic

The Sparta mods and the status in the Galooli solution are linked to facilitate the process of creating an alert.

...

 Mode

Galooli Solution

Maintenance

Idle

In Cabinet

Off

 

Tracking

On, Stop, Moving

Like all other systems, depends on the speed

Users can generate events in the system and link the mode to the status.

...

  1. Click the "Write Configuration" button and after the process is complete, click the "Reset" button.

...

  1. Restore the Sparta's status to In Cabinet.

Lead Acid Battery Compliance For Sparta

...

Northstar

Enersys

Fiamm

Sacred Sun

NSB (150-210)FT

PowerSafe SBS (100-190)F

12 FIT 101

FTA12-100

 

PowerSafe V-FT (100-190)

12 FIT 100/23

FTA12-150 

 

 

12 FIT 150

FTA12-200

 

 

12 FIT 180

 

 

 

12 FIT 201

 

 

 

12 FHT 101

 

 

 

12c FHT 181

 

 

 

12 FHC 95

 

 

 

12 FHC 175 

 

 

 

12 FLB 700

 

...

 

...

Child pages (Children Display)

...