...
The K2 gateway extracts data from multiple sources within the connected vehicle which can then be transformed into actionable business insights.
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Features
SMS configuration commands
SMS information request commands
Onboard, 3-axis accelerometer for driver behavior analysis
In-vehicle, real-time, buzzer indication (Over speeding, Braking, Accelerating, etc.)
Low power operation mode
Vehicle Immobilizing control, including smart output control information (Active state, Current detection, and Overcurrent detection)
Remote version upgrade
Multiple driver Identification devices support (Dallas button, Keypad, RFID cards)
Multiple engine computer diagnostic support options - FMS/OBD (using external MILA7 device)
Multi-function inputs (Configurable as Analog / Digital and State time filtering)
Direct NTC temperature sensor support (Analog 2 input)
GSM Jamming detection (with automatic demobilization control) (Not available at 3G model)
...
Parameter |
|
|---|---|
| ±5% It is recommended that the odometer and Galooli system be synchronized at least once a year or when the gateway is replaced/fixed. |
Indication Indication LEDs
...
Status LED Indications
...
Status | |
|---|---|
Connected to host server | Greenlight blink |
GSM Network found | Red light, low blink |
Searching network | Red light, short blink |
SMS Commands
Request Commands
Used to request a report message of specific parameter information (without changing the parameter's value):
Request structure (sent by the user via SMS):
...
Supported commands:
...
Update Commands
Used to set a specific parameter.
Upon receiving a valid command, the unit will reply with a 'query parameter' message (as described at the Query
Commands section).
Command structure (sent by the user via SMS):
...
Supported commands:
...
Pinout
The TritonK2 use a standard 12-pin harness as described below:
...