...
Username - admin
Password - admin
...
SmartPack2 Configuration
...
Smart_Pack2 Touch + SmartPack S Installation & Configuration
Now that you have installed the appropriate gateway on site, it is time to connect it to the rectifier via the ethernet interface that is supported by the SmartPack 2 touch and SmartPack S.
Connect the Galooli gateway to the rectifier using an Ethernet cable. The technical booklet will specify the specific name, model, and port of the gateway.
In order to configure the Power Center and Galooli solution, please refer to the relevant links for your gateway:
can be found by clicking here - https://galooli.atlassian.net/wiki/spaces/KP/pages/2882338951/Techbase+NPE+X500+M3+Installation+and+Configuration#Computer-Connections
Gateway | Link |
|---|---|
Elara | |
TechBase |
...
SmartPack2 & S Touch SNMP Configuration
...