...
Depending on the device communication method/protocol, select the appropriate method of adding the device to the Power Center.
Select the appropriate device type and any model of the device from the list. Following this action, you must change the "Physical Device ID" to the device ID you specified in the previous paragraph (Paragraph 4). Click “Apply”.
...
Click "Write configuration", wait until the process is complete, and then click "Reset".
Choose the "Configuration" tab, double click on the existing device, and delete all the registers one by one. The ID and Port lines should not be erased.
After all the registers are erased, click on the “Port” line and click on “Add item”.
>> WRITE CONFIGURATION >> RESTART >> לבדוק שיש ערך בENGINE
...
The following wizard will allow you to choose the appropriate register and specify the parameters for that register related to your new device. You can find all the data in the technical specifications/datasheet of the product. If necessary, you may need to contact the manufacturer. Complete the process by applying the changes.
Click "Write configuration", wait until the process is complete, and then click "Reset".
Click on the "Status" tab, open the relevant device option, and compare the Power Center value of the register you added in the previous step with the actual value. Thus, you will be able to verify the accuracy of the readings in Power Center.
Repeat the process for each register individually. Make sure to "Write configuration", wait until the process is complete, and then click "Reset" after each new register adding. More, make sure to check the resiving of data each time for each new register.
e. להוסיף את הפרמטר הבא לפי צילום המסך שעשית לפני תחילת התהליך >> להוסיף את הפרמטר הבא ולחזור על הבדיקה שצוינה מעלה
...