...

Installation Form

TBA

Checkout Form

TBA

Technician

• Finish complete installation as per technical booklet

• Configure all devices in Power Center platform

• Fuel accuracy test done (if relevant)

• Installation and QA report completed and submitted

...

Step 2 - Basic Configuration

TBA

Galooli Solution Basic Configuration

...

• Locate the relevant unit within the "Stock" cluster and click on it. My Unit
  

• The "Overview" tab should be field according to the organization preferences:

  • The ID should be provided by the Galooli support team.

  • Set the gateway a meaningful Name.

  • Set the gateway Activation Date. As a general rule, the activation date will be the date when the unit was created, but if the unit was created before today in the Stock cluster, you may need to adjust the activation date accordingly.

  • Set the “Asset Type”. Asset types should correspond to the types of units that the gateway connects to.

  • Set the "Stationary Unit" to "Yes".

  • Set the destination Email and SMS for future notifications. Email and phone numbers can be set at the cluster or group level as opposed to the unit level.

  • The remainder of the information can be filled in as needed. https://galooli.atlassian.net/l/cp/GUAkk1K4
    

• On the "Configuration" tab >> Click on the “IO’s” submenu >> Add inputs and outputs, followed by calibration tables. On the basis of the IO’s settings, it will be possible to define events in the system later on . - https://galooli.atlassian.net/l/cp/sfiBfhtN. Using the technical booklet provided by Galooli, it is possible to determine what inputs and outputs need to be included.
  

• On the “Configuration” tab >> Choose the “Device Configuration” submenu >> Choose the layout code appropriate to the type of the site. In the same place make any necessary display configurations. https://galooli.atlassian.net/l/cp/qJHywnNj
  

• On the "Configuration” tab >> Select the “Maintenance", set the relevant maintenance dates.
  Maintenance
  

• On the "Configuration" tab >> Choose “KPI” submenu, set all the relevant fields and thresholds that affect dashboards and reports in terms of alerts and calculations. KPI
  

• On the "Events" tab, add the relevant events.https://galooli.atlassian.net/l/cp/zjX0vNmg
  

• On the "Information" tab >> Choose the “Unit” submenu >> Select the “Hardware” section >> Enter the "SIM Phone Number" and "SIM Serial Number". https://galooli.atlassian.net/wiki/spaces/KP/pages/2830041108/Information#Unit
  

• On the "Information" tab >> Choose the “Additional Information” submenu >> It is important to add additional information about the unit in order to display relevant information. https://galooli.atlassian.net/wiki/spaces/KP/pages/2830041108/Information#Additional-Information
  

• Click on “Save”
  

• Transfer the unit from the "Stock" cluster to another relevant cluster. https://galooli.atlassian.net/l/cp/J6c4DHE1
  

• Verify that the unit can be seen on the Panorama map and that the Panorama time stamp is being updated.https://galooli.atlassian.net/l/cp/hth1o23t
  

...