...
To determine whether the smart batteries meet the conditions of their warranty and whether certain batteries need to be replaced, your management requires you to send the following information on a regular basis:
A summary report that will be sent every two days that indicates how many batteries have been overcharged(>90%) show all the batteries whose state of charge is greater than 90%, indicating that they are overcharged.
A daily schedule report that will indicate which batteries are not stored in proper conditions (temperature > 45)stored at a temperature above 45°C, which may result in damage to the batteries
A monthly schedule report that will show what batteries need replacement (SOH < 70%)
...
which identifies which batteries state of health falls below 70%, indicating that they should be replaced.
The Solution
Open the Galooli Pro Application.
To display only batteries with a state of charge greater than 90%, you need to add a field called "Site_Global.Battery_SOC" to the summary report.
To display only batteries with a temperature greater than 45°C, you need to add a field called “Site_Global.Battery_Temperature” to the summary report.
...
Save the report and turn it to a daily schedule report following the instructions in the following document.
My Schedule Reports
To display only batteries with a state of health falls below 70%, you need to add a field called “Site_Global.Battery_SOH” to the summary report.
...
Save the report and turn it to a monthly schedule report following the instructions in the following document.
My Schedule Reports