...
Immobilizer | Towing | Fuel |
|---|---|---|
Create a new “Output” >> You should select a meaningful name and the correct output. All other options should be filled out as shown in the image. | Create a new “Digital” >> You should select a meaningful name. All other options should be filled out as shown in the image. | Create a new “Analog” >> You should select a meaningful name. All other options should be filled out as shown in the image. |
 |  |   |
In “My unit” >> “Configuration” tab >> “Maintenance” >> Set the relevant maintenance data for you vehicle.
In “My unit” >> “Configuration” tab >> “Preferences” >> Set the “Minutes to Idle” value if necessary. As an example, if the engine continues to run for five consecutive minutes without the vehicle is moving, then the vehicle is considered to be in idle status. 5 minutes or more is the recommended value.
In “My unit” >> “Configuration” tab >> “Installation setup” >> Set the vehicle's initial working time, distance, and other parameters if necessary.
In “My unit” >> “Events” tab >> Add all relevant events and set the phone number/email to receive notifications. The events are based in part on the IO's and other configurations that you have made.
The following are some tips and suggestions for useful events.
...