...
Supported Models | Communication Methods | Read/Write Community |
Eltek_SmartPack | RS485 | Not RelevanRelevant |
|
| Read - public |
Eltek_SmartPack2Touch | SNMP | Read - v1community |
Eltek_SmartPackS | SNMP |
...
Smart_Pack2 Touch configuration
...
SmartPack S Touch Configuration
The following steps should be taken as soon as you receive your new “SmartPack S Touch Rectifier”:
1. In order to activate the SNMP option after installation, login to the rectifier controller and copy your
specific MAC address.
2. You will need to contact a representative from "Eltek" to activate the SNMP feature; you will need to
provide the MAC address from the previous paragraph and ask for a "license key.”
3. Once the "license key" has been reserved from "Eltek", enter it and proceed to the next step.
4. Check the “Web-based configuration” to enable the web SNMP configuration.
SNMP is now available
