The Cut Trough Through via the SNMP Over Ethernet allows you to get data and even set it depending on the parameters type.
...
Please note that before starting the process, you must verify whether the parameters you are interested in can be set.
Cut
...
Through Progress
Download the “MIB Browser” - SNMP Monitoring Software.
Open the Power Center >> Connect to the Elara gateway via serial/OTA connection >> Click on “Read Configuration” >> Click on “Status” >> Click on “Status” tab. Now you can see all the information about the rectifier that connected to the Elara gateway.
...
3. The next step is to locate and copy 3 different parameters in order to be able to make the "Cut TroughThrough":
Rectifier IP - Select the "Configuration" tab >> Double-click the "Group: Rectifier” >> Copy the Device IP of the rectifier and save it for later.
...