Versions Compared

Old Version 15

changes.mady.by.user arkadi kaplon

Saved on

compared with

New Version 16

changes.mady.by.user arkadi kaplon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Complete all the steps in this article and proceed to the next step once you have read the parameters.

  2. In order to set parameters, change the “Register command number” to “06” (Always) and the “Amount of Registers” to the value that you want to set.


Code Part


Parameter

Notes

(warning) It is necessary to convert the data from decimal to hexadecimal format(warning)

Decimal to Hexadecimal converter


Example

1

Inverter physical ID

The physical ID of the inverter should remain unchanged

 


2


Register command number

The register command number should be changed to 06 (always)

03 >> 06

3

Register address number

The register agrees number should remain unchanged


4Amount of Registers


Value to set

Change the amount of registers parameter to the value that you wish to set in Hexadecimal and write it in four digits only.

0003 >> 0007

...