...
Communication with the rectifier is accomplished through SNMP over Ethernet.
...
Data Type
...
Can it be read?
...
Can it be set?
...
Data Examples
...
Static Data - Configuration Data
...
...
...
“Generator On Voltage”
...
Static Data - Other Data
...
...
❌
...
“Rectifier Device Type”
...
Live Data
...
...
❌
...
“I Load”, “Solar Power”
משפט - שים לב
OID
Cut Trough Progress
Download the “MIB Browser” - SNMP Monitoring Software.
Open the Power Center >> Connect to the Elara gateway via serial/OTA connection >> Click on “Read Configuration” >> Click on “Status” >> Click on “Status” tab. Now you can see all the information about the rectifier that connected to the Elara gateway.
...
Upon entering the correct OID for a parameter that can be set and clicking "Go", you will be presented with a new window that will allow you to modify the parameter value.It is only possible to edit the relevant parameters mentioned at the beginning of the article.
וודא פרמטר ניתן להעריכה
...