...

...

...

...

...

...

Required equipment:

• Computer

• RS485 Converter

• Power Center application (Power Center Introduction)

• Screwdriver

• Communication Cables

Connectivity Instructions:

1. Connect the communication cables to the 1(A) & 2(B) ports in the RS485 converter
   

   

2. Connect the other side of the cables to the Elara RS485 A & B Ports or the Elara tray/box:
   
   If your Elara is connected through a Tray, connect the cables to the gray terminal blocks, labeled DLS & BZR, while DLS is for Port A, and BZR is for Port B, as shown in the pictures:
   

...

4. Plug the RS485 converter into your computer, the converter will light with a red LED.

Power Center Configuration Instructions:

1. Make a serial connection using the Power Center application, as shown in the image below.
   If your computer is unable to detect the converter, please follow the next link.
   
   Elara's "Time Stamp" is determined by the server and not by GPS

...