Page Comparison

Required equipment:

...

1. Connect the communication cables to the 1(A) & 2(B) ports in the RS485 converter
   

   Image RemovedImage Added

2. Connect the other side of the cables to the Elara RS485 A & B Ports or the Elara tray/box:
   
   If your Elara is connected through a Tray, connect the cables to the gray terminal blocks, labeled DLS & BZR, while DLS is for Port A, and BZR is for Port B, as shown in the pictures:
   

...

1. Make a serial connection using the Power Center application, as shown in the image below.
   If your computer is unable to detect the converter, please follow the next link.

...

• Make sure the “Connection” is “Connected to host”

• Make sure the SD card status is “Inserted / configuration OK”

• The Elara version should be up-to-date (How To Upgrade Elara Version?)

• The Elara IAP version should be up-to-date (How To Upgrade Elara IAP Version?)
  
  2. Perform the steps as displayed in the image below:

...