Required equipment:
Computer
RS485 Converter
Screwdriver
Communication Cables
Instructions
Open the Elara cover and make sure the SD Card and the SIM card are properly inserted. Close the Elara cover at the end of the process.
How to insert SD card? https://galooli.atlassian.net/l/cp/T1fCA5EQConnect the Elara gateway to a power source and grounding
...
2. Connect the GSM antenna to its dedicated socket.
...
Status 1 LED is blinking Green color, one short blink every ~1 second - OK 👍🏻
Status 2 LED is blinking Green color, short blinks
COM (Modem) LED is blinking fast, short blinks
If all three conditions are met proceed to the next configuration step - How to configure APN & Cloud Server.
Troubleshooting
If the Status 1 LED isn’t blinking at all, it means the Elara isn’t getting power - please make sure the green connectors are correctly connected.
Status 2 LED is blinking Green color, short blinks - OK 👍🏻
If the Status 2 LED blinks fast red color, it means the SD card isn’t inserted - Please see how to solve it here - How to insert SD card?
If the Status 2 LED blinks slow red color, it means the configuration files on the SD card are missing/corrupted - Please see how to solve it here - How to import Elara files to the SD card?
COM (Modem) LED is blinking fast, short blinks - OK 👍🏻
If COM LED is blinking red color, it means there is no connection to the cloud server, please see how to solve it here - link
...