Required equipment:

• Computer

• RS485 ConverterPower Center application (Power Center Introduction)

• Screwdriver

• Communication Cables

Instructions

1. Open the Elara cover and make sure the SD Card and the SIM card are properly inserted. Close the Elara cover at the end of the process.
   How to insert SD card? https://galooli.atlassian.net/l/cp/T1fCA5EQ
   

2. Connect the Elara gateway to a power source and grounding

...

2. Connect the GSM antenna to its dedicated socket.

...

3. Connect the RS485 cables to the USB converter to the RS485 inputs and then, connect the USB to the computer.

...

• Status 1 LED is blinking Green color, one short blink every ~1 second - OK 👍🏻

  • If the Status 1 LED isn’t blinking at all, it means the Elara isn’t getting power - please make sure the green connectors are correctly connected.

• Status 2 LED is blinking Green color, short blinks - OK 👍🏻

  • If the Status 2 LED blinking blinks fast red color, it means the SD card isn’t inserted - Please see how to solve it here - How to insert SD card?

  • If the Status 2 LED blinking blinks slow red color, it means the configuration files on the SD card are missing/corrupted - Please see how to solve it here - How to import Elara files to the SD card?

• COM (Modem) LED is blinking fast, short blinks - OK 👍🏻

  • If COM LED is blinking red color, it means there is no connection to the cloud server, please see how to solve it here - link

...