...
...
...
...
...
...
Required equipment:
Computer
RS485 Converter
Power Center application (Power Center Introduction)
Screwdriver
Communication Cables
Instructions
Connect the Elara gateway to a power source and grounding
...
3. Connect the RS485 to the USB converter to the RS485 inputs and then, connect the USB to the computer.
...
34. Connect the relevant analog/digital inputs and output to the Elara
...
45. Make sure the Status LEDs are blinking as follows:
...
Status 1 LED is blinking Green color, one short blink every ~1 second - OK 👍🏻
If the Status 1 LED isn’t blinking at all, it means the Elara isn’t getting power - please make sure the green connectors are correctly connected.
Status 2 LED is blinking Green color, short blinks - OK 👍🏻
If the Status 2 LED blinking fast red color, it means the SD card isn’t inserted - Please see how to solve it here - How to insert SD card?
If the Status 2 LED blinking slow red color, it means the configuration files on the SD card are missing/corrupted - Please see how to solve it here - How to import Elara files to the SD card?
COM (Modem) LED is blinking fast, short blinks - OK 👍🏻
If COM LED is blinking red color, it means there is no connection to the cloud server, please see how to solve it here - link