Page Comparison

Please complete all the steps as detailed below before installation. Completing all relevant steps will help to ensure successful fuel readings from the Holykell sensor:

1. Inspect the fuel tank for installation.

2. Measure the tank’s dimensions as follows and record all measurements in the calibration excel table:
   
   a. Hexagonal Tank:

L - External Tank Length W - Tank External Width D2 - Tank External Height D1 - Tank Internal Height • Fuel Level (measured using the stick) • Metal Thickness

Image Added

b. Vertical Cylinder Tank:

d - External Tank Diameter h - External Tank Height h1 - Tank Internal Height • Fuel Level (measured using the stick) • Metal Thickness

Image Added

c. Horizontal Cylinder Tank:

R - Radius of Tank h - Distance from top to fuel • Tank External Length • Tank External Diameter (internal height) • Metal Thickness • Tank Volume

Image Added

3. Ensure the tank is clean and void of traces of dirt and sludge. Dirty tanks will impact the accuracy of the fuel sensor reading and might cause malfunctions in the sensor itself

4. Use the manual fuel pump to extract a fuel sample. Pour the sample into a separate transparent container. Inspect the fuel in the container to verify the fuel does not contain water or sludge, as this will affect the readings from the sensor.

...